12μm Shiny Rolling Cu Foil Roll For Wide Copper Tape , Copper Foiling

12u Shiny Rolling Cu Foil Roll For Wide Copper Tape With Max Width 650mm​
 
 
Produict Information : 

1.  Civen RA Copper Foil is rolled from pure copper ingots, the process including purifying copper ores,  make into copper cathodes,  ingoting,  rolling, annealing, washing, testing, slitting and packing. Our copper ores are imported from South America, which were famous for their copper mining.
2.  This is high quality copper and has a wide range of applications based on conductivity, corrosion resistance, workability, and beauty.
3.  110-anneal (Electrolytic Tough Pitch or ETP) dead soft. Min 99.99% CU.

 
 Key Features:
  

1.  Cuts with scissors or paper cutter .
2.  Can be hammered, texturized or punched.
3.  Used for many outside or inside projects.
4.  There are many applications based on workability and beauty.
5.  Dead soft, very pliable  .
6.  Thick enough, so when glued to a backing-board, wood grain does not show through  .
7.  Often used for punching, scrapbooking and other paper crafts.
8.  Has a wide range of applications based on workabilty and beauty.
9.  Excellent for tooling and will dent easily with a light touch but will not hold its shape under pressure.
10.  Has a wide range of applications based on workability and beauty

 
Advantages : 
 

1.  Rolled Copper Foil has extraordinary strength, bendability, ductility and lustrous surface, plus its excellent mechanical capacity, makes it irreplaceable as a raw material. Especially when used for transformer, Copper Flexible Connector, CCL, FCCL, PCB, Geothermal Film, Construction, Decoration etc.
2.  The copper foil made by Civen can be customized for different temper, which including soft , quarter hard,half hard , hard temper, even special soft and special hard temper. 
3.  Soft temper are particularly strong demanded since it has wide range of use. For transformer, it need soft cooper foil to avoid high resistance and good heat radiating when it work.For copper flexible connector , it prefer soft copper because it has good extension and bendiablity. And for CCL,FCCLand PCB useage, the copper they needed will depending on the surface roughness. But for decorating and some other application, they need the copper to be hard and then it will not be out of shape when after a period of time.
4.  RA copper foil’s special features make it irreplaceable for most of electronic requirements acted as thermal conductive, electricity conductive, EMI/EMC or some other functions.  

 
Technical Parts : 
 
 
1. Raw Material 
 

 
 
2. Mechanical Properties
 
 

 
 
Note: 
 
We can provide products with other properties according to customers` requirements.
 
Size and tolerance 
 

 
 
3. Specifications available 
 
 

 
 
4. Carried standards
 
 

 
5. Concact :
 

Packaging:Inner packing: Different Plastic Spools According To lead screen Sizes ,Outer packing: Carton/Wooden Box Or As Customer Required.

As for packaging,we want to say you please don't worry that our products are packed, stored, transported according to the international regulation. We do care about the quality of our products; even some little details are paid attention to. We wrap the brass foils products with anti-rust paper and steel rings to prevent damage.

Identification labels are tagged according to standard specification or customer's instructions. Special packing is available as per customer's requirement. Plus, our storage racks are made of wood.

Other kinds of metals are settled in other places, far from the stainless steel. Any unwanted chemical reaction can be prevented.